Screen Layout

Categories

SCREEN LAYOUT

Prior to beginning the Capturing process, you should familiarize yourself with the screen layouts of the various Capturing menus. Many functions can be selected using the APASview Tool Bar or by selecting the appropriate command from the Pull-Down Menus.

THE APASview TOOL BAR

You can activate many functions by selecting the icons located on the APASview program tool bar. The tool bar is located near the top of the window. Icons are pictorial representations of commands or functions. You can access the following commands by clicking the appropriate icon.

_{DataWindow toolbar.}

_{The DataWindow is provided with speedbuttons to speedup the usability and to add special features such as printing, copy to the clipboard and other useful stuff.}

_{The following speedbuttons are located in the DataWindow:}

Switch the DataWindow contents to the bargraph type.

Switch the DataWindow contents to the linegraph type.

Switch the DataWindow contents to spreadsheet type.

This button will turn of the grid.

This button will turn on the grid

This button will display all data channels separately.

This button will display all data channels in the same co-ordinate system.

This button will bring up the set-up window.

Send the contents of the DataWindow to the printer.

Copy the contents of the DataWindow to the clipboard.

Check the APASview help.

_{StickWindow toolbar}

The StickWindow is provided with speedbuttons to speedup the usability and to add special features such as printing, copy to the clipboard and other useful stuff.

The following speedbuttons are located in the StickWindow:

 Rotate the stickfigure to original orientation (tilt angle : 0° , pan angle: 0° )

 Zoom the stickfigure to fit the window size.

 Impose the stickfigure as a sequence.

 Trace markers in the stickfigure.

 This button will bring up the setup window.

 Send the contents of the StickWindow to the printer.

 Copy the contents of the StickWindow to the clipboard.

 Check the APASview help.

 Rotate the stickfigure 90 degrees to the left.

 Rotate the stickfigure 90 degrees the right.

 Rotate the stickfigure 90 degrees up.

 Rotate the stickfigure 90 degrees down.

THE STATUS BAR

The status bar provides useful information about the current status of the image file. The status bar is located at the bottom of the APASview window. The far left side of the status bar is divided into two separate fields; VCR status field and the Video capture display mode.

This page was last modified on 06/29/2001 at 20:26 PST. Copyright © 1994 - 2002, all rights reserved, Ariel Dynamics Inc. Please send your comments or feedback to webmaster@arielnet.com or proceed to our feedback form. This page has been accessed 157 times since Dec 12, 2002. Our privacy policy is here.